Support

The device in action, installation in pictures

Watch the device put out real fires, then see how it works and how to install it correctly, step by step. Filmed installation tutorials are coming soon.

In action

A real fire, put out automatically

Real tests in a panel, an enclosure and an electrical cabinet: detection, activation and extinguishing, with no intervention at all.

With or without protection: a 14-second difference

Same electrical fire, two outcomes: the protected enclosure is extinguished before the fire can spread.

Detection across the full width

The heat-sensitive cable picks up the fire wherever it starts, above each breaker. See the correct installation

Fire in an electrical panel: automatic extinguishing

No intervention: the generator triggers on its own as soon as the cable reaches 170 °C, with no pressure and no electricity.

Large cabinet: generators mounted in series

Test on a 600 L rack protected by several generators linked in series, the principle of Industrial range.

In 1 minute

The questions we’re asked most

Short answers, filmed by our technical team.

Same panel, two results

Side-by-side test in real conditions, with and without an automatic extinguisher.

3 a.m.: who steps in?

While you sleep or are away, the device keeps watch on its own.

Why several sizes?

A small enclosure isn’t protected the same way as a cabinet. Find my model

5 years, no refills

No maintenance, no inspections: install it, write down the date, replace it after 5 years.

Solar inverter

Equipment that heats up and runs every day. Protect your solar setup

Pool control box

Pump, filtration, salt chlorinator: an enclosure that runs for hours in summer.

How it works

From fire to replacement

Step 1: a fire starts from overheating or a short circuit in the electrical panel
Step 2: heat is detected by the heat-sensitive cable
Step 3: the cable automatically triggers the aerosol generator
Step 4: the condensed aerosol spreads through the enclosure and puts out the fire
Step 5: the fire is under control, the equipment is preserved
Step 6: after the incident, replace the device to stay protected

Installation

Correct installation

Correct installation: the detection cable must cover the full width above the breakers
StickerProMaxx 50Mx with detection cable snaking across each row of an electrical cabinet