Selection guide

FAQ: choosing and installing

Answers to the questions we’re asked most often before purchase. For warranty, delivery or an activation, see the Support FAQ.

How do I choose the right model?

Count the modules on the fullest row of your panel and the number of rows, or measure the enclosure. The selection guide gives you the model in 1 minute.

Why count modules rather than volume?

Because an electrical fire starts at the terminals and breakers, the detection cable must cover the full width of the row. Choose detection first, volume second.

Can I install it myself?

Yes. No wiring is needed: switch off the power, stick or screw the generator to the ceiling of the panel, and lay out the cable. If in doubt, call an electrician.

Where exactly should it go?

On the ceiling of the enclosure, diffuser facing down, above the breakers, with the detection cable laid across the full width of the fullest row.

Is it dangerous for occupants?

The generator stays enclosed in the panel and only triggers at 170 °C. The aerosol is non-toxic at working concentrations; after an activation, air out the room before spending time in it.

Does it replace a fire extinguisher or a smoke detector?

No. It protects the inside of the panel, where no one can step in in time. It complements your smoke detector and fire extinguisher.

Does it work during a power outage?

Yes. Activation is thermal, via the cable: no power supply is needed.

Does it need maintenance?

No. With no pressure and no moving parts, it only needs a visual check. Replacement is required after 5 years of service or 6 years from manufacture, whichever comes first.

Which fires is it effective on?

Classes B, C, E (electrical) and F; limited effectiveness on class A fires.

Can’t find your question?

Email us and we’ll reply within 2 business days.