Technology
Condensed aerosol: putting out an electrical fire without pressure or water
A StickerProMaxx contains no pressurized gas and no powder: it holds a solid compound that, once activated, turns into an aerosol of ultra-fine particles. These particles chemically interrupt the combustion reaction.

How it works
Three stages, a few seconds

- Detection. Overheating or a flame brings the heat-sensitive cable to 170 °C (± 10 °C). It reacts within 2 to 4 seconds.
- Activation. The cable ignites the generator with no power supply at all: the system works even if the power is off.
- Extinguishing. The condensed aerosol fills the closed enclosure and puts out the fire within seconds. The enclosure and nearby equipment are preserved.
Chemical inhibition
What sets it apart from other extinguishing methods
A fire stands on four pillars: fuel, oxygen, heat and a self-sustaining chain reaction. Traditional extinguishers cool, smother or dilute. StickerProMaxx condensed aerosol goes straight for the chain reaction: its particles capture the flame’s free radicals and stop it from within.
- Immediate chemical action, at the heart of combustion
- Fire knocked down within seconds, no re-ignition
- No water, no pressurized gas, no corrosive powder

| Extinguishing method | Principle | Activation | Pressure | Installation | Residue | Maintenance |
|---|---|---|---|---|---|---|
| StickerProMaxx condensed aerosol | Chemical inhibition of the chain reaction | Automatic at 170 °C, no power supply | None | Stuck or screwed in place, no piping | Under 1 g, non-conductive | None, replace after 5 years |
| Inert gas | Lowers the oxygen level | Detection and control panel | High-pressure cylinders | Piping network | None | Periodic inspections |
| Powder | Smothering and inhibition | Usually manual | Pressurized tank | Unit placed nearby | Heavy, corrosive powder | Periodic inspections |
Indicative comparison, for educational purposes.
Composition
| Potassium salts | 30 to 70% |
| Strontium salts | 20 to 50% |
| Organic additives | 2 to 10% |
| Resins | 2 to 15% |
Composition protected by a European patent.
Environment and safety
- ODP = 0: no effect on the ozone layer
- GWP = 0: no greenhouse effect
- Non-conductive agent, residue under 1 g, non-toxic
- ABS V0 housing, 100% recyclable
Common specifications
The same guarantees across all 11 models
| Activation | Thermal, 170 °C ± 10 °C, via heat-sensitive cable |
| Fire classes | B, C, E, F effective; A limited |
| Protection rating | IP20, indoor use |
| Operating temperature | -30 °C to +70 °C (-22 °F to +158 °F) |
| Humidity | 0 to 98% |
| Altitude | up to 3,000 m (9,800 ft) |
| Vibration | 8 G |
| Mounting | At the top, only above the hazard |
| Service life | 6 years maximum from manufacture; replace after 5 years |
Compliance and documents
EU type-examination passed, patented, designed and assembled in France
Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France.

