Residential range

Residential range: protect your electrical panel

Compact generators that stick to the ceiling of the panel and put out a fire on their own, with no power, no pressure and no maintenance. You choose by counting the modules on the fullest row.

  • From 4-module enclosures to 4-row panels
  • Up to 30 liters per enclosure
  • Installs in 30 seconds, no wiring
  • Coming soon
StickerProMaxx Residential range: aerosol generator installed in a home electrical panel

170 °C

activation threshold

0

pressure, wiring or maintenance

5 years

warranty and service life

30 s

to install

Who it’s for, what it’s for

Every electrical enclosure in your home

Home panel

24-module electrical panel protected by StickerProMaxx in a garage

The main panel brings together every circuit: it’s where most electrical fires start.

Pool control box

Protecting a pool electrical box with StickerProMaxx

Pump, filtration, lighting: an enclosure often outdoors and under heavy use. Plan for at least a StickerProMaxx 08.

Solar and EV charger

Protecting a DC and AC solar box with a StickerProMaxx generator

DC and AC boxes, EV charger box: at least a StickerProMaxx 08.

The models

Choose by the width to cover

ModelCapacityDetectionMax. volumeMax. mounting heightPrice incl. VATData sheet
StickerProMaxx 044 modules, 1 rowbuilt-in loop · 5 cm30 L20 cmComing soonBuyPDF
StickerProMaxx 088 modules per row, up to 4 rows13 cm30 L65 cmComing soonBuyPDF
StickerProMaxx 1212 modules per row, up to 4 rows23 cm30 L65 cmComing soonBuyPDF
StickerProMaxx 1818 modules per row, up to 4 rows33 cm30 L65 cmComing soonBuyPDF

Over 30 liters, or several well-filled rows? The StickerProMaxx 50Mx protects up to 50 liters with 135 cm of cable laid above every row. Beyond 50 liters, move up to the Pro range.

Two levels of protection

Essential or Full: it all comes down to detection

Essential — StickerProMaxx 04 to 18

Residential range: StickerProMaxx 04, 08, 12 and 18 depending on the number of breakers

The detection cable runs above the fullest row. In a multi-row panel, the heat from a fire has to rise up to the cable.

Full — StickerProMaxx 50Mx (Pro range)

StickerProMaxx 50Mx with detection cable snaking across each row of an electrical cabinet

135 cm of serpentine cable above every row (4 rows of 13 modules): a fire is detected where it starts, in about 2 seconds, up to 50 liters. The 50Mx is now part of the Pro range.

Our advice: for a panel with 3 or 4 well-filled rows, choose the 50Mx from the Pro range. We sell detection width first, volume second.

Installation rules

Three rules to follow

Installs in 30 seconds. Double-sided adhesive or two screws, no electrical wiring.

On the ceiling of the enclosure, diffuser facing down, cable laid out above the entire fullest row (or above every row).

Single use, closed volume. After an activation, the generator must be replaced. The enclosure must be closed (0 to 2% ventilation).

Correct installation: the detection cable must cover the full width above the breakers

Frequently asked questions

Is it dangerous for children or pets?

The generator is enclosed in the panel and only triggers at 170 °C. The aerosol released is non-toxic at working concentrations; after an activation, air out the room before spending time in it.

Does it replace a fire extinguisher?

No. The StickerProMaxx protects the inside of the panel, where no one can step in in time. It complements your fire extinguisher and smoke detector; it doesn’t replace them.

My panel has 4 rows of 13 modules: which one should I choose?

The StickerProMaxx 18 protects the panel by monitoring the fullest row (30 liters max.). The 50Mx, from the Pro range, monitors every row and goes up to 50 liters: that’s the Full level.

Do I need an electrician?

No, installation requires no wiring. Just switch off the power before opening the panel; if in doubt, get help from an electrician.

How long does it last?

5-year warranty; replacement is required after 5 years of service or 6 years from manufacture, whichever comes first. No maintenance in between.

Accessories

For a wider panel

A detection cable extension lets you cover a row wider than the built-in cable.

AX-DETECT-ML heat-sensitive detection cable on a reel, sold by the meter, for StickerProMaxx automatic extinguishers

AX-DETECT-ML detection cable

Extension sold by the meter to cover a wider row or detect on every row.

Coming soon

AX-SERIE copper crimp connector for linking StickerProMaxx generators in series

AX-SERIE connector

Copper crimp connector: joins an extension or links several generators in series.

Coming soon

AX-6ADH70 adhesive heat-shrink sleeve to protect StickerProMaxx detection cable joints

AX-6ADH70 sleeve

Heat-shrink sleeve that insulates and protects each crimped joint.

Coming soon

Find your model in 30 seconds

Count the modules on the fullest row of your panel: the guide gives you the right model.