Support
The device in action, installation in pictures
Watch the device put out real fires, then see how it works and how to install it correctly, step by step. Filmed installation tutorials are coming soon.
In action
A real fire, put out automatically
Real tests in a panel, an enclosure and an electrical cabinet: detection, activation and extinguishing, with no intervention at all.
With or without protection: a 14-second difference
Same electrical fire, two outcomes: the protected enclosure is extinguished before the fire can spread.
Detection across the full width
The heat-sensitive cable picks up the fire wherever it starts, above each breaker. See the correct installation
Fire in an electrical panel: automatic extinguishing
No intervention: the generator triggers on its own as soon as the cable reaches 170 °C, with no pressure and no electricity.
Large cabinet: generators mounted in series
Test on a 600 L rack protected by several generators linked in series, the principle of Industrial range.
In 1 minute
The questions we’re asked most
Short answers, filmed by our technical team.
Same panel, two results
Side-by-side test in real conditions, with and without an automatic extinguisher.
3 a.m.: who steps in?
While you sleep or are away, the device keeps watch on its own.
Why several sizes?
A small enclosure isn’t protected the same way as a cabinet. Find my model
5 years, no refills
No maintenance, no inspections: install it, write down the date, replace it after 5 years.
Solar inverter
Equipment that heats up and runs every day. Protect your solar setup
Pool control box
Pump, filtration, salt chlorinator: an enclosure that runs for hours in summer.
How it works
From fire to replacement






Installation
Correct installation


