Automatic fire extinguisher for electrical panels

Fire stops here.

Your electrical panel protected in 30 seconds

Stuck to the top of the panel, the StickerProMaxx detects a fire starting at 170 °C (338 °F) and puts it out on its own within seconds. No power, no pressure, no maintenance.

Find your protection in 30 seconds

Cabinet or enclosure? Calculate by dimensions

  • EU type-examination passed · European patent
  • 5-year warranty, maintenance-free
  • Shipping to France and Europe within 2 business days
StickerProMaxx Residential range: aerosol generator installed in a home electrical panel

170 °C

activation threshold

0

pressure, wiring or maintenance

5 years

warranty and service life

30 s

to install

Where to start

What do you need to protect?

Your home

24-module electrical panel protected by StickerProMaxx in a garage

Electrical panel, pool, solar, EV charger, camper van.

Electrician

StickerProMaxx 50Mx with detection cable snaking across each row of an electrical cabinet

Multi-row panels, every model compared, packs of 2.

Commercial and industrial

StickerProMaxx Industrial range: generator installed in an industrial electrical cabinet

Enclosures, main switchboards, server racks, automation: from 125 to 1,000 liters.

Best sellers

Most popular

StickerProMaxx 18

Residential

StickerProMaxx 18

The home panel: up to 18 modules per row.

Coming soon

StickerProMaxx 50Mx

Pro

StickerProMaxx 50Mx

Full protection: one cable on every row.

Coming soon

StickerProMaxx 250

Pro

StickerProMaxx 250

Commercial enclosures up to 250 liters.

Coming soon

StickerProMaxx 750

Industrial

StickerProMaxx 750

Electrical cabinets up to 750 liters.

Coming soon

How it works

Detect, activate, extinguish

  1. Detection: the heat-sensitive cable reacts at 170 °C, within 2 to 4 seconds.
  2. Activation: the generator triggers on its own, with no power supply.
  3. Extinguishing: the condensed aerosol fills the enclosure and puts out the fire without damaging the equipment.
How it works in 3 steps: heat detection, fast activation, extinguishing

Why protect the panel

Electrical fires: an underestimated risk

€14,000

average cost of a home fire claim in France (France Assureurs 2025)

#1 cost

in French home insurance payouts in 2025: fire (28.7%)

20 to 35%

of home fires are electrical in origin (ONSE)

82.6%

of electrical installations over 15 years old have at least one defect (ONSE)

Compliance and documents

EU type-examination passed, patented, designed and assembled in France

Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France.

StickerProMaxx generator EU type-examination under Directive 2013/29/EU

Frequently asked questions

Why count modules rather than volume?

Because an electrical fire starts at the terminals and breakers, the detection cable must cover the full width of the row. Choose detection first, volume second.

Can I install it myself?

Yes. No wiring is needed: switch off the power, stick or screw the generator to the top of the panel, and lay out the cable. If in doubt, call an electrician.

Where exactly should it go?

On the ceiling of the enclosure, diffuser facing down, above the breakers, with the detection cable laid across the full width of the fullest row.

Is it dangerous for occupants?

The generator stays enclosed in the panel and only triggers at 170 °C. The aerosol is non-toxic at working concentrations; after activation, air out the room before spending time in it.

Does it replace a fire extinguisher or a smoke detector?

No. It protects the inside of the panel, where no one can step in in time. It complements your smoke detector and fire extinguisher.

Find your model in 1 minute

Count the modules on the fullest row, or measure your cabinet.