Industrial range
Industrial range: electrical cabinets up to 1 m³
Power, distribution or control cabinets: the StickerProMaxx 500, 750 and 1000 protect up to 1,000 liters per generator and can be mounted in series for the largest cabinets.
- 500 to 1,000 liters per generator
- Mounts up to 190 cm high
- Series mounting with a dedicated junction
- Price per protected m³ announced at launch

170 °C
activation threshold
0
pressure, wiring or maintenance
5 years
warranty and service life
30 s
to install
Large cabinets
One cabinet, several zones: series mounting
Beyond 1,000 liters, or when a cabinet is split into several compartments, several generators are distributed. Linked by a series junction, they all trigger together as soon as one of them detects heat.
The detection cable is laid above each row of equipment: the wider the detection, the earlier the extinguishing.

The models
Three volumes
| Model | Capacity | Detection | Max. volume | Max. mounting height | Price incl. VAT | Data sheet | |
|---|---|---|---|---|---|---|---|
| StickerProMaxx 500 | enclosure ≤ 800 × 1,900 mm | 50 cm | 500 L | 190 cm | Coming soon | Buy | |
| StickerProMaxx 750 | enclosure ≤ 1,100 × 1,900 mm | 50 cm | 750 L | 190 cm | Coming soon | Buy | |
| StickerProMaxx 1000 | enclosure ≤ 1,200 × 1,900 mm | 50 cm | 1,000 L | 190 cm | Coming soon | Buy |
Transport: UN 3178 pyrotechnic generators, class 4.1, packing group III. Delivery to France, the European Union, Switzerland, Norway and the United Kingdom.
Installation rules
Three rules to follow
No piping, no pressurized tank. Mounts with adhesive and/or screws, no wiring.
At the top of the cabinet, diffuser facing down, 190 cm maximum, cable above the equipment.
Closed volume. Effectiveness requires a closed cabinet (0 to 2% ventilation). Single use.

Frequently asked questions
Does the aerosol damage equipment?
No. The agent is non-conductive and leaves less than 1 g of non-toxic residue that can be cleaned dry.
What is the environmental impact?
ODP = 0 and GWP = 0: the agent doesn’t deplete the ozone layer and has no greenhouse effect. 100% recyclable housing.
Do I need a maintenance contract?
No. No pressure, no moving parts: a visual check is enough, with replacement after 5 years.
How do I protect a 1.5 m³ cabinet?
By combining several generators mounted in series, distributed by zone. See the Sizing several zones page.
Accessories
Everything to install and extend the protection
Detection extension, series mounting and activation signaling: the calculator gives you the exact quantities.

AX-DETECT-ML detection cable
Extension sold by the meter to cover a wider row or detect on every row.
Coming soon

AX-SERIE connector
Copper crimp connector: joins an extension or links several generators in series.
Coming soon

AX-6ADH70 sleeve
Heat-shrink sleeve that insulates and protects each crimped joint.
Coming soon

AX-SERTX crimping tool
The tool designed for AX-SERIE connectors, for a reliable joint.
Coming soon

AX-SERFLEX cable ties
Green 100 mm cable ties, bag of 100, to secure the cable directly above the breakers.
Coming soon

AX-REPORT signaling kit
Dry contact and 3 Ω resistor: power cutoff or status reporting to a control panel, BMS or PLC.
Coming soon
Size your cabinet
Measure the inside width, height and depth: the guide calculates the volume and suggests the combination.
