Instructions
StickerProMaxx installation and user instructions
Just bought a StickerProMaxx? Everything is here. Choose your language:
Not sure which model you have?
See the data sheetsFirst of all: switch off the power at the main breaker before opening the panel or enclosure.
Installation
How to install an automatic extinguisher in an electrical panel
- Switch off the power at the breaker or main disconnect.
- Open the enclosure: remove the front panel or cover, or open the door.
- Clean the mounting surface, preferably with isopropyl alcohol.
- Mount it on the ceiling of the enclosure, diffuser facing down, directly above the breakers, at the maximum height specified for your model. Press for 3 to 4 seconds, or fix with two screws.
- Lay out the detection cable above the entire fullest row (or above every row), without tight bends; nothing must block the diffuser.
- Close up, switch the power back on and write the installation date on the warranty label.
Lithium batteries: the generator protects the electrical enclosure; it doesn’t address thermal runaway in a lithium battery.
Golden rule
Positioning the generator correctly
- On the ceiling of the enclosure, head (diffuser) facing down
- Cable directly above the breakers, across the full width
- Closed enclosure, 0 to 2% ventilation
- No modification to the generator

After installation
Warranty and replacement
Write the installation date on the label. Visual check once a year; replace after 5 years. To register your installation, email support@stickerpromaxx.com.
After an activation
The 5 key steps
- Wait a few minutes, enclosure closed.
- Switch off the power at the main breaker.
- Air out the room.
- Clean the residue dry and have the installation checked.
- Replace the generator (single use).

Frequently asked questions
Can I install it myself?
Yes. No wiring is needed: switch off the power, stick or screw the generator to the ceiling of the panel, and lay out the cable. If in doubt, call an electrician.
Where exactly should it go?
On the ceiling of the enclosure, diffuser facing down, above the breakers, with the detection cable laid across the full width of the fullest row.
Is it dangerous for occupants?
The generator stays enclosed in the panel and only triggers at 170 °C. The aerosol is non-toxic at working concentrations; after an activation, air out the room before spending time in it.
Does it replace a fire extinguisher or a smoke detector?
No. It protects the inside of the panel, where no one can step in in time. It complements your smoke detector and fire extinguisher.
Does it work during a power outage?
Yes. Activation is thermal, via the cable: no power supply is needed.
Does it need maintenance?
No. With no pressure and no moving parts, it only needs a visual check. Replacement is required after 5 years of service or 6 years from manufacture, whichever comes first.
Support: support@stickerpromaxx.com · +33 6 86 11 96 05 · Monday to Friday, 9 a.m. – 6 p.m. (CET)
