Ships within 2 business days · Free pickup-point delivery over €49.90 in France

Find my model

StickerProMaxx 04

For 4-module enclosures only
4 breakers on one row, enclosure up to 30 L, mounted no more than 20 cm from the bottom. More than 4 modules (pool or solar box…)? See the StickerProMaxx 08.

  • Triggers on its own at 170 °C, within 2 to 4 seconds
  • No pressure, no power, no maintenance
  • Installs in 30 seconds, no wiring
  • 5-year warranty · EU type-examination passed (P1)

PDF data sheet · Installation instructions

SKU: N/A Category:

Description

Description


It keeps watch in your 4-module enclosure, so you don’t have to


The StickerProMaxx 04 is a single-use aerosol generator that sticks to the ceiling of a 4-module electrical enclosure. Its heat-sensitive detection loop reacts on contact with the flame at 170 °C and, within 2 to 4 seconds, releases a condensed aerosol that puts out the fire inside the enclosure.


No pressure, no piping, no power supply: nothing to maintain for 5 years. The aerosol is non-conductive and its residue, under 1 g, is non-corrosive.


What it doesn’t replace: a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.


Is it the right model?


Enclosure 4 modules, single row
Breakers 4 maximum
Enclosure volume 30 liters maximum
Mounting height 20 cm (8 in) max. from the bottom of the enclosure
Detection 1 heat-sensitive detection loop
Enclosure ventilation 0 to 2% (closed enclosure)


Example: an enclosure with more than 4 modules cannot be effectively protected by this model: beyond 4 modules → StickerProMaxx 08, 12 or 18.


Technical specifications


Model SPM-04
Housing dimensions 67 × 25 × 14.9 mm
Total weight 12.8 g
Extinguishing agent 3.66 g ± 3% (potassium and strontium salts)
Wall thickness 2 mm
Housing Flame-retardant ABS V0
Mounting double-sided adhesive and/or screws
Activation temperature 170 °C ± 10 °C, on contact with the flame
Activation time < 2 to 4 s via heat-sensitive cable
Discharge time 6 to 12 s
Operating pressure unpressurized
Fire classes B, C, E, F effective · A limited
Temperature range −30 °C to +70 °C (−22 °F to +158 °F)
Humidity · altitude 0 to 98% · 3,000 m max.
Protection IP20, indoor use


Installation in 6 steps


Electrical safety. Switch off the power before any work. The supply side of the main breaker, solar panels and batteries may remain live. If in doubt, call an electrician.


  1. Switch off the power at the breaker or main disconnect.
  2. Open the enclosure : remove the cover or front panel.
  3. Clean the mounting surface, preferably with isopropyl alcohol.
  4. Stick it to the ceiling of the enclosure, diffuser facing down, directly above the breakers, no more than 20 cm from the bottom. Press for 3 to 4 seconds (or fix with two screws).
  5. Check that the detection loop is clear and positioned above the area to protect, and that nothing blocks the diffuser.
  6. Close up, switch the power back on and write the installation date on the warranty label.


Warranty and service life


Warranty 5 years, with compliant installation and normal use
Service life 6 years
Replacement after 5 years, or after any activation
Inspection visual, once a month


Compliance and documents


Aerosol generator, category P1 pyrotechnic firefighting device (Directive 2013/29/EU), EU type-examination passed with notified body No. 0163. European patent. Designed and assembled in Toulouges, France.


Data sheet · Instructions · EU declaration of conformity · Safety data sheet


Frequently asked questions


Can I install it myself?

Yes. The StickerProMaxx 04 mounts inside the enclosure in 30 seconds, with no electrical wiring at all. Switch off the power before opening the enclosure; if in doubt, call an electrician.


My enclosure has more than 4 modules: is this the right model?

No. The StickerProMaxx 04 is only for 4-module enclosures: its detection doesn’t cover a longer row. A pool or solar box, for example, requires at least a StickerProMaxx 08. Choose a StickerProMaxx 08, 12 or 18, whose detection cable covers 13, 23 or 33 cm.


Does it need maintenance?

No: it is unpressurized and maintenance-free. A simple monthly visual check is enough (housing secure, diffuser clear, detection loop intact), and you replace it after 5 years.


What happens when it activates?

The flame triggers the detection loop at 170 °C: within 2 to 4 seconds, the generator releases a condensed aerosol that puts out the fire inside the enclosure within 6 to 12 seconds. Then: wait, switch off the power, air out the room, clean the residue (under 1 g, non-corrosive) and replace the device.


Does the aerosol damage electrical equipment?

No. The aerosol is non-conductive and its residue is minimal and non-corrosive: it tackles an electrical (class E) fire without cutting off or damaging nearby equipment.


Does it replace a fire extinguisher?

No. It automatically protects the inside of a closed enclosure. It doesn’t replace a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.

Additional information

Weight 27,8 g
Dimensions 6,7 × 2,5 × 1,49 cm
Range

Residential

Breakers

4 maximum

Protected volume

30 liters

Mounting height

20 cm (8 in) max. from the bottom

Activation

170 °C ± 10 °C, 2 to 4 s

Warranty

5 years

Enclosure

4 modules, one row

Packaging

Single unit, Pack of 2

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.