StickerProMaxx 750
Cabinet up to 750 liters
Enclosure up to 750 liters (for example 100 × 50 × 150 cm), mounted no more than 190 cm from the bottom, series mounting possible. Need more? See the StickerProMaxx 1000.
- Triggers on its own at 170 °C, within 2 to 4 seconds
- Detection: 50 cm of heat-sensitive cable
- No pressure, no power, no maintenance
- 5-year warranty · EU type-examination passed (P1)
Description
Description
StickerProMaxx 750: the automatic extinguisher for electrical cabinets up to 750 liters
For large industrial electrical cabinets, it protects up to 750 liters and puts out a fire on its own, with no power, no pressure and no maintenance.
Power cabinet or workshop main switchboard: the StickerProMaxx 750 protects a volume of up to 750 liters, for example a 100 × 50 × 150 cm cabinet.
What it doesn’t replace: a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.
Is it the right model?
| Enclosure volume | 750 liters maximum (for example 100 × 50 × 150 cm) |
| Mounting height | 190 cm (75 in) max. from the bottom of the enclosure |
| Detection | 50 cm of heat-sensitive cable, placed above the most exposed area |
| Ventilation | 0 to 2%; beyond that, increase the capacity |
| Large volumes | several generators mounted in series |
Technical specifications
| Model | SPM-750 |
| Housing dimensions | 135 × 45 × 20.3 mm |
| Total weight | 74.6 g |
| Extinguishing agent | 36.6 g ± 3% (potassium and strontium salts) |
| Housing | Flame-retardant ABS V0 |
| Mounting | double-sided adhesive and/or screws |
| Detection | 50 cm (20 in) of heat-sensitive cable |
| Activation temperature | 170 °C ± 10 °C, on contact with the flame |
| Activation time | < 2 to 4 s via heat-sensitive cable |
| Discharge time | 20 to 30 s |
| Operating pressure | unpressurized |
| Fire classes | B, C, E, F effective · A limited |
| Temperature range | −30 °C to +70 °C (−22 °F to +158 °F) |
| Humidity · altitude | 0 to 98% · 3,000 m max. |
| Protection | IP20, indoor use |
Installation in 6 steps
Electrical safety. Switch off the power before any work. The supply side of the main breaker, solar panels and batteries may remain live. If in doubt, call an electrician.
- Switch off the power at the breaker or main disconnect.
- Open the enclosure : remove the front panel or cover, or open the door.
- Clean the mounting surface, preferably with isopropyl alcohol.
- Mount it on the ceiling of the enclosure, diffuser facing down, directly above the area to protect, no more than 190 cm from the bottom. Press for 3 to 4 seconds (or fix with two screws).
- Lay out the 50 cm cable above the most exposed area (terminal blocks, breakers, drives), without tight bends, and check that nothing blocks the diffuser.
- Close up, switch the power back on and write the installation date on the warranty label.
Warranty and service life
| Warranty | 5 years, with compliant installation and normal use |
| Service life | 6 years |
| Replacement | after 5 years, or after any activation |
| Inspection | visual, once a month |
Compliance and documents
Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France. Transport: UN 3178, class 4.1, packing group III.
Data sheet · Instructions · EU declaration of conformity · Safety data sheet
Frequently asked questions
Who can install it?
The StickerProMaxx 750 mounts with no electrical wiring, but work inside an electrical cabinet must be done by a qualified person. Our support team can help you size the installation: support@stickerpromaxx.com.
My cabinet is larger than this model’s volume: what should I do?
Choose the next model up, or mount several generators in series. Our support team can carry out a feasibility study: support@stickerpromaxx.com.
Does it need maintenance?
No: it is unpressurized and maintenance-free. A simple monthly visual check is enough (housing secure, diffuser clear, detection cable intact), and you replace it after 5 years.
What happens when it activates?
The flame triggers the detection cable at 170 °C: within 2 to 4 seconds, the generator releases a condensed aerosol that puts out the fire inside the enclosure within 20 to 30 s. Then: wait, switch off the power, air out the room, clean the residue (under 1 g, non-corrosive) and replace the device.
Does the aerosol damage electrical equipment?
No. The aerosol is non-conductive and its residue is minimal and non-corrosive: it tackles an electrical (class E) fire without damaging nearby equipment.
Does it replace a fire extinguisher?
No. It automatically protects the inside of a closed enclosure. It doesn’t replace a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.
Additional information
| Weight | 89,6 g |
|---|---|
| Dimensions | 13,5 × 4,5 × 2,03 cm |
| Range | Industrial |
| Capacity | Cabinet up to 750 liters |
| Protected volume | 750 liters |
| Detection | 50 cm (20 in) of heat-sensitive cable |
| Mounting height | 190 cm (75 in) max. from the bottom |
| Activation | 170 °C ± 10 °C, 2 to 4 s |
| Warranty | 5 years |
Only logged in customers who have purchased this product may leave a review.









Reviews
There are no reviews yet.