StickerProMaxx 04
For 4-module enclosures only
4 breakers on one row, enclosure up to 30 L, mounted no more than 20 cm from the bottom. More than 4 modules (pool or solar box…)? See the StickerProMaxx 08.
- Triggers on its own at 170 °C, within 2 to 4 seconds
- No pressure, no power, no maintenance
- Installs in 30 seconds, no wiring
- 5-year warranty · EU type-examination passed (P1)
Description
Description
It keeps watch in your 4-module enclosure, so you don’t have to
The StickerProMaxx 04 is a single-use aerosol generator that sticks to the ceiling of a 4-module electrical enclosure. Its heat-sensitive detection loop reacts on contact with the flame at 170 °C and, within 2 to 4 seconds, releases a condensed aerosol that puts out the fire inside the enclosure.
No pressure, no piping, no power supply: nothing to maintain for 5 years. The aerosol is non-conductive and its residue, under 1 g, is non-corrosive.
What it doesn’t replace: a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.
Is it the right model?
| Enclosure | 4 modules, single row |
| Breakers | 4 maximum |
| Enclosure volume | 30 liters maximum |
| Mounting height | 20 cm (8 in) max. from the bottom of the enclosure |
| Detection | 1 heat-sensitive detection loop |
| Enclosure ventilation | 0 to 2% (closed enclosure) |
Example: an enclosure with more than 4 modules cannot be effectively protected by this model: beyond 4 modules → StickerProMaxx 08, 12 or 18.
Technical specifications
| Model | SPM-04 |
| Housing dimensions | 67 × 25 × 14.9 mm |
| Total weight | 12.8 g |
| Extinguishing agent | 3.66 g ± 3% (potassium and strontium salts) |
| Wall thickness | 2 mm |
| Housing | Flame-retardant ABS V0 |
| Mounting | double-sided adhesive and/or screws |
| Activation temperature | 170 °C ± 10 °C, on contact with the flame |
| Activation time | < 2 to 4 s via heat-sensitive cable |
| Discharge time | 6 to 12 s |
| Operating pressure | unpressurized |
| Fire classes | B, C, E, F effective · A limited |
| Temperature range | −30 °C to +70 °C (−22 °F to +158 °F) |
| Humidity · altitude | 0 to 98% · 3,000 m max. |
| Protection | IP20, indoor use |
Installation in 6 steps
Electrical safety. Switch off the power before any work. The supply side of the main breaker, solar panels and batteries may remain live. If in doubt, call an electrician.
- Switch off the power at the breaker or main disconnect.
- Open the enclosure : remove the cover or front panel.
- Clean the mounting surface, preferably with isopropyl alcohol.
- Stick it to the ceiling of the enclosure, diffuser facing down, directly above the breakers, no more than 20 cm from the bottom. Press for 3 to 4 seconds (or fix with two screws).
- Check that the detection loop is clear and positioned above the area to protect, and that nothing blocks the diffuser.
- Close up, switch the power back on and write the installation date on the warranty label.
Warranty and service life
| Warranty | 5 years, with compliant installation and normal use |
| Service life | 6 years |
| Replacement | after 5 years, or after any activation |
| Inspection | visual, once a month |
Compliance and documents
Aerosol generator, category P1 pyrotechnic firefighting device (Directive 2013/29/EU), EU type-examination passed with notified body No. 0163. European patent. Designed and assembled in Toulouges, France.
Data sheet · Instructions · EU declaration of conformity · Safety data sheet
Frequently asked questions
Can I install it myself?
Yes. The StickerProMaxx 04 mounts inside the enclosure in 30 seconds, with no electrical wiring at all. Switch off the power before opening the enclosure; if in doubt, call an electrician.
My enclosure has more than 4 modules: is this the right model?
No. The StickerProMaxx 04 is only for 4-module enclosures: its detection doesn’t cover a longer row. A pool or solar box, for example, requires at least a StickerProMaxx 08. Choose a StickerProMaxx 08, 12 or 18, whose detection cable covers 13, 23 or 33 cm.
Does it need maintenance?
No: it is unpressurized and maintenance-free. A simple monthly visual check is enough (housing secure, diffuser clear, detection loop intact), and you replace it after 5 years.
What happens when it activates?
The flame triggers the detection loop at 170 °C: within 2 to 4 seconds, the generator releases a condensed aerosol that puts out the fire inside the enclosure within 6 to 12 seconds. Then: wait, switch off the power, air out the room, clean the residue (under 1 g, non-corrosive) and replace the device.
Does the aerosol damage electrical equipment?
No. The aerosol is non-conductive and its residue is minimal and non-corrosive: it tackles an electrical (class E) fire without cutting off or damaging nearby equipment.
Does it replace a fire extinguisher?
No. It automatically protects the inside of a closed enclosure. It doesn’t replace a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.
Additional information
| Weight | 27,8 g |
|---|---|
| Dimensions | 6,7 × 2,5 × 1,49 cm |
| Range | Residential |
| Breakers | 4 maximum |
| Protected volume | 30 liters |
| Mounting height | 20 cm (8 in) max. from the bottom |
| Activation | 170 °C ± 10 °C, 2 to 4 s |
| Warranty | 5 years |
| Enclosure | 4 modules, one row |
| Packaging | Single unit, Pack of 2 |
Only logged in customers who have purchased this product may leave a review.









Reviews
There are no reviews yet.