StickerProMaxx 18
Panel up to 18 modules per row
18 modules per row, up to 4 rows (choose based on the fullest row), enclosure up to 30 L, mounted no more than 65 cm from the bottom. Need more? See the StickerProMaxx 50Mx.
- Triggers on its own at 170 °C, within 2 to 4 seconds
- Detection: 33 cm of detection cable
- No pressure, no power, no maintenance
- 5-year warranty · EU type-examination passed (P1)
PDF data sheet · Installation instructions
Pack of 2: coming soon.
Description
Description
StickerProMaxx 18: the automatic extinguisher for your home electrical panel
Stuck to the ceiling of the electrical panel, it covers a row of up to 18 modules with its 33 cm of detection cable and puts out a fire on its own within seconds, with no power, no pressure and no maintenance.
The main panel brings together every circuit in the home: one loose terminal, one worn breaker, and overheating starts behind a closed door. With 33 cm of detection cable, the StickerProMaxx 18 covers a full row of 13 to 18 modules.
What it doesn’t replace: a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.
Is it the right model?
| Enclosure | 18 modules per row, up to 4 rows (choose based on the fullest row) |
| Enclosure volume | 30 liters maximum |
| Mounting height | 65 cm (25.6 in) max. from the bottom of the enclosure |
| Detection | 33 cm of detection cable |
| Enclosure ventilation | 0 to 2% (closed enclosure) |
Example: a 45 cm wide PVC enclosure cannot be effectively protected by the 18: move up to the StickerProMaxx 50Mx.
Technical specifications
| Model | SPM-18 |
| Housing dimensions | 120 × 18 × 16 mm |
| Total weight | 22.4 g |
| Extinguishing agent | 3.66 g ± 3% (potassium and strontium salts) |
| Housing | Flame-retardant ABS V0 |
| Mounting | double-sided adhesive and/or screws |
| Detection | 33 cm of detection cable |
| Activation temperature | 170 °C ± 10 °C, on contact with the flame |
| Activation time | < 2 to 4 s via heat-sensitive cable |
| Discharge time | 2 to 4 s |
| Operating pressure | unpressurized |
| Fire classes | B, C, E, F effective · A limited |
| Temperature range | −30 °C to +70 °C (−22 °F to +158 °F) |
| Humidity · altitude | 0 to 98% · 3,000 m max. |
| Protection | IP20, indoor use |
Installation in 6 steps
Electrical safety. Switch off the power before any work. The supply side of the main breaker, solar panels and batteries may remain live. If in doubt, call an electrician.
- Switch off the power at the breaker or main disconnect.
- Open the enclosure : remove the front panel or cover, or open the door.
- Clean the mounting surface, preferably with isopropyl alcohol.
- Mount it on the ceiling of the enclosure, diffuser facing down, directly above the area to protect, no more than 65 cm from the bottom. Press for 3 to 4 seconds (or fix with two screws).
- Lay out the detection cable (33 cm) above the entire fullest row, without tight bends, and check that nothing blocks the diffuser.
- Close up, switch the power back on and write the installation date on the warranty label.
Warranty and service life
| Warranty | 5 years, with compliant installation and normal use |
| Service life | 6 years |
| Replacement | after 5 years, or after any activation |
| Inspection | visual, once a month |
Compliance and documents
Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France.
Data sheet · Instructions · EU declaration of conformity · Safety data sheet
Frequently asked questions
Can I install it myself?
Yes. The StickerProMaxx 18 mounts inside the panel in 30 seconds, with no electrical wiring at all. Switch off the power before opening the panel; if in doubt, call an electrician.
My panel is larger than 30 liters: what should I choose?
The StickerProMaxx 18 protects up to 30 liters. For a larger panel, up to 50 liters, move up to the StickerProMaxx 50Mx, whose 135 cm of cable covers 4 rows of 13 modules.
Does it need maintenance?
No: it is unpressurized and maintenance-free. A simple monthly visual check is enough (housing secure, diffuser clear, detection cable intact), and you replace it after 5 years.
What happens when it activates?
The flame triggers the detection cable at 170 °C: within 2 to 4 seconds, the generator releases a condensed aerosol that puts out the fire inside the enclosure within 2 to 4 s. Then: wait, switch off the power, air out the room, clean the residue (under 1 g, non-corrosive) and replace the device.
Does the aerosol damage electrical equipment?
No. The aerosol is non-conductive and its residue is minimal and non-corrosive: it tackles an electrical (class E) fire without damaging nearby equipment.
Does it replace a fire extinguisher?
No. It automatically protects the inside of a closed enclosure. It doesn’t replace a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.
Additional information
| Weight | 37,4 g |
|---|---|
| Dimensions | 12,0 × 1,8 × 1,6 cm |
| Packaging | Single unit, Pack of 2 |
| Range | Residential |
| Capacity | Panel up to 18 modules per row |
| Protected volume | 30 liters |
| Detection | 33 cm of detection cable |
| Mounting height | 65 cm (25.6 in) max. from the bottom |
| Activation | 170 °C ± 10 °C, 2 to 4 s |
| Warranty | 5 years |
Only logged in customers who have purchased this product may leave a review.










Reviews
There are no reviews yet.