Ships within 2 business days · Free pickup-point delivery over €49.90 in France

Find my model

StickerProMaxx 50Mx

Panel with 4 rows of 13 modules, enclosure up to 50 L
4 rows of 13 modules, zone height up to 650 mm, enclosure up to 50 L, mounted no more than 65 cm from the bottom.

  • Triggers on its own at 170 °C, within 2 to 4 seconds
  • Detection: 135 cm of cable, 2 loops
  • No pressure, no power, no maintenance
  • 5-year warranty · EU type-examination passed (P1)

PDF data sheet · Installation instructions
Pack of 2: coming soon.

SKU: N/A Category:

Description

Description


StickerProMaxx 50Mx: full panel protection, row by row


Its 135 cm of detection cable snakes above every row: wherever the fire starts, it’s detected within 2 seconds. It’s the most complete protection for an electrical panel.


With standard detection, the cable sits above the top row: a fire that starts lower down has to rise up to it. The StickerProMaxx 50Mx runs its cable above every row, so it triggers at the very first flames, wherever they appear.


What it doesn’t replace: a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.


Is it the right model?


Enclosure 4 rows of 13 modules, zone height up to 650 mm
Enclosure volume 50 liters maximum
Mounting height 65 cm (25.6 in) max. from the bottom of the enclosure
Detection 135 cm of cable, 2 loops
Enclosure ventilation 0 to 2% (closed enclosure)


Technical specifications


Model SPM-50MX
Housing dimensions 120 × 18 × 16 mm
Total weight 28.35 g
Extinguishing agent 3.66 g ± 3% (potassium and strontium salts)
Housing Flame-retardant ABS V0
Mounting double-sided adhesive and/or screws
Detection 135 cm of cable, 2 loops
Activation temperature 170 °C ± 10 °C, on contact with the flame
Activation time < 2 to 4 s via heat-sensitive cable
Discharge time 2 to 4 s
Operating pressure unpressurized
Fire classes B, C, E, F effective · A limited
Temperature range −30 °C to +70 °C (−22 °F to +158 °F)
Humidity · altitude 0 to 98% · 3,000 m max.
Protection IP20, indoor use


Installation in 6 steps


Electrical safety. Switch off the power before any work. The supply side of the main breaker, solar panels and batteries may remain live. If in doubt, call an electrician.


  1. Switch off the power at the breaker or main disconnect.
  2. Open the enclosure : remove the front panel or cover, or open the door.
  3. Clean the mounting surface, preferably with isopropyl alcohol.
  4. Mount it on the ceiling of the enclosure, diffuser facing down, directly above the area to protect, no more than 65 cm from the bottom. Press for 3 to 4 seconds (or fix with two screws).
  5. Snake the 135 cm cable above every row of breakers, without tight bends, and check that nothing blocks the diffuser.
  6. Close up, switch the power back on and write the installation date on the warranty label.


Warranty and service life


Warranty 5 years, with compliant installation and normal use
Service life 6 years
Replacement after 5 years, or after any activation
Inspection visual, once a month


Compliance and documents


Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France.


Data sheet · Instructions · EU declaration of conformity · Safety data sheet


Frequently asked questions


Can I install it myself?

Yes. The StickerProMaxx 50Mx mounts inside the panel in 30 seconds, with no electrical wiring at all. Switch off the power before opening the panel; if in doubt, call an electrician.


Why a cable above every row?

Because a fire that starts in a lower row takes time to reach a cable placed at the top of the panel. With 135 cm of cable spread across all 4 rows, detection happens within 2 seconds, whichever row it is.


Does it need maintenance?

No: it is unpressurized and maintenance-free. A simple monthly visual check is enough (housing secure, diffuser clear, detection cable intact), and you replace it after 5 years.


What happens when it activates?

The flame triggers the detection cable at 170 °C: within 2 to 4 seconds, the generator releases a condensed aerosol that puts out the fire inside the enclosure within 2 to 4 s. Then: wait, switch off the power, air out the room, clean the residue (under 1 g, non-corrosive) and replace the device.


Does the aerosol damage electrical equipment?

No. The aerosol is non-conductive and its residue is minimal and non-corrosive: it tackles an electrical (class E) fire without damaging nearby equipment.


Does it replace a fire extinguisher?

No. It automatically protects the inside of a closed enclosure. It doesn’t replace a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.

Additional information

Weight 43,35 g
Dimensions 12,0 × 1,8 × 1,6 cm
Packaging

Single unit, Pack of 2

Range

Pro

Capacity

Panel with 4 rows of 13 modules, enclosure up to 50 L

Protected volume

50 liters

Detection

135 cm of cable, 2 loops

Mounting height

65 cm (25.6 in) max. from the bottom

Activation

170 °C ± 10 °C, 2 to 4 s

Warranty

5 years

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.