Solution — commercial

Main switchboard: putting out the fire at the source

The low-voltage main switchboard powers the whole building: a fire there means business interruption, a claim and bringing everything back up to code. A StickerProMaxx generator at the top puts it out automatically, with no piping and no cylinder.

  • From 125 to 1,000 liters per generator
  • Series mounting for large cabinets
  • No pressure, no maintenance
  • Non-conductive agent
StickerProMaxx Industrial range: generator installed in an industrial electrical cabinet

170 °C

activation threshold

0

pressure, wiring or maintenance

5 years

warranty and service life

30 s

to install

The risk

Power connections and aging

Busbars, heavy-gauge terminal blocks, main breakers: a loose connection or an overload creates a hot spot that can smolder for hours in a closed cabinet. Cable detection above the equipment reacts at 170 °C.

Industrial electrical cabinet protected by StickerProMaxx with a detection cable on each row

Which model?

Choose by cabinet volume

ModelCapacityDetectionMax. volumeMax. mounting heightPrice incl. VAT
StickerProMaxx 125enclosure ≤ 600 × 900 mm50 cm125 L90 cmComing soonBuy
StickerProMaxx 250enclosure ≤ 650 × 1,100 mm50 cm250 L110 cmComing soonBuy
StickerProMaxx 500enclosure ≤ 800 × 1,900 mm50 cm500 L190 cmComing soonBuy
StickerProMaxx 750enclosure ≤ 1,100 × 1,900 mm50 cm750 L190 cmComing soonBuy
StickerProMaxx 1000enclosure ≤ 1,200 × 1,900 mm50 cm1,000 L190 cmComing soonBuy

Compartmentalized cabinet or one over 1,000 liters: distribute several generators linked in series, see Sizing several zones.

Installation

Positioning the generator correctly

  1. Lock out the cabinet (isolation and lockout) according to site rules.
  2. Measure the inside volume (width × height × depth) and check that the enclosure is closed (0 to 2% ventilation).
  3. Mount it at the top, diffuser facing down, above the hazard, at the maximum height allowed for the model (90 to 190 cm).
  4. Lay out the heat-sensitive cable above each row of equipment, without tight bends.
  5. Return to service and record the installation date in the safety log.

Frequently asked questions

Does the StickerProMaxx replace the building’s fire detection system?

No. It protects the inside of the cabinet; it complements the existing fire safety system.

Can the activation be signaled remotely?

A remote signaling option (audible alarm, power cutoff, status reporting) is available for professional installations.

What maintenance is required?

None apart from a visual check during periodic inspections; replace after 5 years.

Accessories

Accessories for main switchboards

Detection on every row, series mounting and activation signaling to the monitoring system.

StickerProMaxx AX-REPORT signaling kit: dry contact cable for power cutoff or status reporting

AX-REPORT signaling kit

Dry contact and 3 Ω resistor: power cutoff or status reporting to a control panel, BMS or PLC.

Coming soon

AX-DETECT-ML heat-sensitive detection cable on a reel, sold by the meter, for StickerProMaxx automatic extinguishers

AX-DETECT-ML detection cable

Extension sold by the meter to cover a wider row or detect on every row.

Coming soon

AX-SERIE copper crimp connector for linking StickerProMaxx generators in series

AX-SERIE connector

Copper crimp connector: joins an extension or links several generators in series.

Coming soon

Size your cabinet

Measure the inside of the enclosure: the guide calculates the volume and suggests the model.