Industrial range

StickerProMaxx 1000: the automatic extinguisher for electrical cabinets up to 1 m³

The most powerful in the range: it protects an electrical cabinet of up to 1,000 liters and puts out a fire on its own, with no power, no pressure and no maintenance.

  • Electrical cabinet up to 1,000 liters
  • 50 cm (20 in) of heat-sensitive cable
  • Mounts up to 190 cm from the bottom, series mounting possible
StickerProMaxx 1000: 1,000-liter aerosol generator with 50 cm heat-sensitive cable

170 °C

activation threshold

50 cm

detection

1,000 L

protected volume

5 years

warranty

StickerProMaxx Industrial range: generator installed in an industrial electrical cabinet

Industrial electrical cabinet

The generator mounts on the ceiling of the cabinet, above the equipment to protect.

Which enclosure is it for?

The largest cabinets

Distribution cabinet, main switchboard, large automation cabinet: the StickerProMaxx 1000 protects up to 1,000 liters, for example a 100 × 55 × 180 cm cabinet. Beyond that, several generators are mounted in series.

Is it the right model?

Is the 1000 right for your cabinet?

The golden rule: the detection cable must cover the hazard zone, and the enclosure volume must not exceed the generator’s capacity. Choose detection first, volume second.

The StickerProMaxx 1000 is right if…

Enclosure volume1,000 liters maximum (for example 100 × 55 × 180 cm)
Mounting height190 cm (75 in) max. from the bottom of the enclosure
Detection50 cm of heat-sensitive cable, placed above the most exposed area
Ventilation0 to 2%; beyond that, increase the capacity
Large volumesseveral generators mounted in series
How it works in 3 steps: heat detection, fast activation, extinguishing

How it works

It detects, it activates, it extinguishes

  • Detection. The heat-sensitive cable (50 cm) reacts on contact with the flame, at 170 °C ± 10 °C.
  • Activation. Within 2 to 4 seconds, with no electricity and no human intervention.
  • Extinguishing. A condensed aerosol of potassium and strontium particles fills the enclosure and stops combustion within 22 to 32 s.

No pressurized cylinder, no piping, no battery: the generator stays inert until the day it is needed.

Installation

30 seconds to install, no wiring

Electrical safety. Switch off the power before any work. The supply side of the main breaker, solar panels and batteries may remain live. If in doubt, call an electrician.

  1. Switch off the power at the breaker or main disconnect.
  2. Open the enclosure : remove the front panel or cover, or open the door.
  3. Clean the mounting surface, preferably with isopropyl alcohol.
  4. Mount it on the ceiling of the enclosure, diffuser facing down, directly above the area to protect, no more than 190 cm from the bottom. Press for 3 to 4 seconds (or fix with two screws).
  5. Lay out the 50 cm cable above the most exposed area (terminal blocks, breakers, drives), without tight bends, and check that nothing blocks the diffuser.
  6. Close up, switch the power back on and write the installation date on the warranty label.
Two StickerProMaxx generators mounted in series in a large industrial cabinet

Ceiling mounting only, directly above the area to protect. Avoid any direct heat source.

Why condensed aerosol

Protection you install and forget

No pressure, no maintenance

No hydrostatic testing, no refills: 6-year service life, replace after 5 years.

Made for electrical fires

Non-conductive aerosol, effective on class E (electrical) fires, residue under 1 g, non-corrosive and non-toxic.

Compact and eco-friendly

135 mm long and 86.8 g, 100% recyclable housing, zero impact on the ozone layer and climate (ODP 0, GWP 0).

Pro and Industrial ranges

Compare models

Choose the model based on the inside volume of the enclosure. Beyond 1,000 liters, several generators are mounted in series.

ModelVolumeDetectionDischargeMax. mounting height
StickerProMaxx 125125 L50 cm10–20 s90 cm
StickerProMaxx 250250 L50 cm12–22 s110 cm
StickerProMaxx 500500 L50 cm16–26 s190 cm
StickerProMaxx 750750 L50 cm20–30 s190 cm
StickerProMaxx 10001,000 L50 cm22–32 s190 cm
Industrial range: StickerProMaxx 500, 750 and 1000, protection up to 1 m³

Compliance and documents

EU type-examination passed, patented, designed and assembled in France

Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France. Transport: UN 3178, class 4.1, packing group III.

StickerProMaxx generator EU type-examination under Directive 2013/29/EU

Frequently asked questions

Your questions about the StickerProMaxx 1000

Who can install it?

The StickerProMaxx 1000 mounts with no electrical wiring, but work inside an electrical cabinet must be done by a qualified person. Our support team can help you size the installation: support@stickerpromaxx.com.

My cabinet is larger than this model’s volume: what should I do?

Choose the next model up, or mount several generators in series. Our support team can carry out a feasibility study: support@stickerpromaxx.com.

Does it need maintenance?

No: it is unpressurized and maintenance-free. A simple monthly visual check is enough (housing secure, diffuser clear, detection cable intact), and you replace it after 5 years.

What happens when it activates?

The flame triggers the detection cable at 170 °C: within 2 to 4 seconds, the generator releases a condensed aerosol that puts out the fire inside the enclosure within 22 to 32 s. Then: wait, switch off the power, air out the room, clean the residue (under 1 g, non-corrosive) and replace the device.

Does the aerosol damage electrical equipment?

No. The aerosol is non-conductive and its residue is minimal and non-corrosive: it tackles an electrical (class E) fire without damaging nearby equipment.

Does it replace a fire extinguisher?

No. It automatically protects the inside of a closed enclosure. It doesn’t replace a portable extinguisher for a fire that has spread to the room, or a fire safety system where one is required.

Protect your cabinet today

Ships within 2 business days from Toulouges, France · delivery to France, the European Union, Switzerland, Norway and the United Kingdom · 5-year warranty.