Packs and bundles
StickerProMaxx packs and bundles: protect all your enclosures
A home rarely has just one electrical enclosure. Packs of 2 cover the main panel and a second high-risk spot, at a better price than buying individually.
- Better value than buying individually
- Free pickup-point delivery in France on all packs
- 5-year warranty, no pressure, no maintenance
- Tool-free installation, on the ceiling of the enclosure

Why two?
Your main panel isn’t the only high-risk spot
An overheating terminal block, a loose connection, an appliance drawing a lot of current: electrical fires often start where nobody is looking.
Subpanel or secondary panel

Upstairs, in an outbuilding or a workshop: a second panel, often forgotten, with the same risks as the main panel.
Models: StickerProMaxx 08 to 50Mx, depending on the fullest row
Junction boxes

Connections made with terminal strips or connectors heat up over time, in a closed box nobody monitors.
Models: StickerProMaxx 04, 08 or 12
Garage and EV charger

A car charging for hours, often overnight: a fire in the enclosure goes unnoticed.
Models: StickerProMaxx 08 and up
Pool control box

Pump, filtration, lighting: an enclosure often outdoors and under heavy use.
Models: at least a StickerProMaxx 08
DC/AC solar box

On both the DC and AC sides, solar enclosures work all day long.
Models: at least one StickerProMaxx 08 per enclosure
And after an activation?

The device has done its job and is replaced. With the second unit from the pack on hand, the enclosure is protected again the same day.
Installing in a junction box: the generator can be mounted anywhere in the box, in any direction. The detection cable, however, always runs horizontally, just above the connections : flames rise, so they must reach the cable as quickly as possible.
Packs of 2 · Residential range
Choose your pack by detection width
The wider the detection cable’s coverage, the earlier a fire is detected. Compare detection first, price second.
Pack of 2

Pack of 2 StickerProMaxx 04
Detection: built-in loop · 5 cm
Single-row enclosure, 4 modules
Coming soon
Pack of 2

Pack of 2 StickerProMaxx 08
Detection: 13 cm
8 modules per row, up to 4 rows
Coming soon
Pack of 2

Pack of 2 StickerProMaxx 12
Detection: 23 cm
12 modules per row, up to 4 rows
Coming soon
Pack of 2

Pack of 2 StickerProMaxx 18
Detection: 33 cm
18 modules per row, up to 4 rows
Coming soon
Full protection

Pack of 2 StickerProMaxx 50Mx
Detection: 135 cm
4 rows, cable above every row
Coming soon
Power strip pack

COREVOLT pack
Protected power strip
Fire-resistant box, 4-outlet power strip + 6 USB ports and extinguishing generator
Coming soon
Free shipping: in France, pickup-point delivery is free on orders over €49.90. All packs qualify.

Not sure which model?
The calculator answers in 1 minute
Enter the volume, width and height of your enclosure: the calculator gives you the right model and the appropriate level of protection.
Power strip pack
COREVOLT: the power strip that puts out its own fire
A black fire-resistant storage box, a grounded 4-outlet power strip with 3 USB-A and 3 USB-C (3680 W / 16 A), and a standalone extinguishing generator: everything ships together.
Coming soon

Accessories
Complete your installation
Extension, connectors and alarm signaling: everything you need to adapt the protection to your enclosure.

AX-DETECT-ML detection cable
Extension by the meter for a panel wider than the built-in cable, or to detect above every row.
Coming soon

AX-SERIE connector
Copper crimp connector to join an extension or link generators in series.
Coming soon

AX-6ADH70 sleeve
Adhesive heat-shrink sleeve that protects and insulates each crimped joint.
Coming soon

AX-SERTX crimping tool
For clean crimping of the AX-SERIE connectors on the detection cable.
Coming soon

AX-SERFLEX cable ties
Green 100 mm cable ties, bag of 100, to secure the detection cable along the rows.
Coming soon

AX-REPORT signaling kit
Dry contact and 3 Ω resistor: cuts the power or reports the device’s status to a third-party system.
Coming soon
Pack FAQ
Does the pack contain two identical devices?
Yes: two units of the same model, each with its own installation instructions.
Can I mix two models in a pack?
Not at the moment: a pack contains two units of the same model. To equip different enclosures, add each model individually to your cart.
How long does the second device keep?
The device has a 6-year service life and is replaced after 5 years. It needs no maintenance, no pressure checks and no refills.
Can I return a pack?
Yes, within 14 days, if the product hasn’t been opened. Return shipping is at your expense. Send your request to support@stickerpromaxx.com.
Is shipping free?
In France, pickup-point delivery is free on orders over €49.90, which includes every pack; home delivery is free over €99. In the European Union, pickup-point delivery is free over €59.90.
Equip all your enclosures today
A pack of 2 for the main panel and the second high-risk spot: ships within 2 business days.
