Selection guide

Choose by number of breakers

Open the panel door, find the fullest row and count its modules (one standard breaker = 1 module of 18 mm; one RCD = 2 modules). Also enter the number of rows.

Find your protection in 30 seconds

Cabinet or enclosure? Calculate by dimensions

Residential range: StickerProMaxx 04, 08, 12 and 18 depending on the number of breakers

Quick reference

The selection table

Modules on the fullest rowRowsModelDetection cablePrice incl. VAT
up to 41 onlyStickerProMaxx 04built-in loop · 5 cmComing soon
5 to 81 to 4StickerProMaxx 0813 cmComing soon
9 to 121 to 4StickerProMaxx 1223 cmComing soon
13 to 181 to 4StickerProMaxx 1833 cmComing soon
up to 13 per row (Full, 50 L)4StickerProMaxx 50Mx135 cmComing soon

Check the volume too: the Residential range protects a panel of up to 30 liters (about 50 × 60 × 10 cm); the 50Mx from the Pro range goes up to 50 liters. Beyond that, choose by volume.

No strict limit on the number of breakers: a panel is suitable as soon as the volume, width, height and cable are right; a cable extension covers a wider width.

Frequently asked questions

My panel has rows of 13 modules: is the 12 enough?

No, take the StickerProMaxx 18: its 33 cm cable covers the whole row. A cable that’s too short leaves breakers outside the detection zone.

My enclosure has 6 modules on one row: is the 04 suitable?

No, the 04 is limited to 4 modules. Choose the StickerProMaxx 08.

I have 4 full rows: Essential or Full?

The 18 protects the panel by monitoring the fullest row. The 50Mx monitors every row and detects a fire in about 2 seconds: that’s the Full level.