StickerProMaxx ranges

Three ranges, one technology: the right protection for every enclosure

From a small pool control box to a one-cubic-meter industrial cabinet, every StickerProMaxx automatically puts out an electrical fire with the same condensed aerosol. What changes from one range to the next: the detection width and the protected volume.

StickerProMaxx ranges: Industrial (SPM-1000, SPM-750, SPM-500), Pro (SPM-250, SPM-125 and SPM-50Mx) and Residential (SPM-18, SPM-12, SPM-08, SPM-04)

170 °C

activation threshold

0

pressure, wiring or maintenance

5 years

warranty and service life

30 s

to install

Choose your range

Choose the width to monitor first, then the volume

An electrical fire starts at the terminals and breakers. The detection cable must therefore cover the entire row concerned: that is the first selection criterion, ahead of the enclosure volume.

Residential

Residential range: StickerProMaxx 04, 08, 12 and 18 depending on the number of breakers

Home electrical panel, pool control box, solar enclosure, multi-row panel. From the StickerProMaxx 04 (4 modules) to the 18 (up to 4 rows), up to 30 liters.

Pro

StickerProMaxx Pro range: 50Mx (135 cm detection, 50 L), 125 and 250 (50 cm detection, 125 and 250 liters)

4-row panels and commercial enclosures: the StickerProMaxx 50Mx monitors every row with 135 cm (53 in) of cable; the StickerProMaxx 125 and 250 protect up to 250 liters with 50 cm (20 in) of heat-sensitive cable.

Industrial

Industrial range: StickerProMaxx 500, 750 and 1000, protection up to 1 m³

Electrical cabinets up to 1 m³ (35 cu ft): StickerProMaxx 500, 750 and 1000, with series mounting for larger volumes.

The 11 models

The whole range in one table

ModelCapacityDetectionMax. volumeMax. mounting heightPrice incl. VATData sheet
StickerProMaxx 044 modules, 1 rowbuilt-in loop · 5 cm30 L20 cmComing soonBuyPDF
StickerProMaxx 088 modules per row, up to 4 rows13 cm30 L65 cmComing soonBuyPDF
StickerProMaxx 1212 modules per row, up to 4 rows23 cm30 L65 cmComing soonBuyPDF
StickerProMaxx 1818 modules per row, up to 4 rows33 cm30 L65 cmComing soonBuyPDF
StickerProMaxx 50Mx4 rows of 13 modules135 cm, serpentine50 L65 cmComing soonBuyPDF
StickerProMaxx 125enclosure ≤ 600 × 900 mm50 cm125 L90 cmComing soonBuyPDF
StickerProMaxx 250enclosure ≤ 650 × 1,100 mm50 cm250 L110 cmComing soonBuyPDF
StickerProMaxx 500enclosure ≤ 800 × 1,900 mm50 cm500 L190 cmComing soonBuyPDF
StickerProMaxx 750enclosure ≤ 1,100 × 1,900 mm50 cm750 L190 cmComing soonBuyPDF
StickerProMaxx 1000enclosure ≤ 1,200 × 1,900 mm50 cm1,000 L190 cmComing soonBuyPDF

Understand the technology

Chemical flame inhibition, with no drop in oxygen, no pressure and no conductive residue: see how StickerProMaxx condensed aerosol works.

How it works in 3 steps: heat detection, fast activation, extinguishing

Compliance and documents

EU type-examination passed, patented, designed and assembled in France

Aerosol generator, category P1 pyrotechnic firefighting device under Directive 2013/29/EU. EU type-examination (Module B) passed with notified body No. 0163 (LOM). Composition protected by a European patent. Designed and assembled in Toulouges, France.

StickerProMaxx generator EU type-examination under Directive 2013/29/EU